Docsis 3.1 Will Change Cable's Data Channels

To achieve multi-gigabit speeds without FTTH, cable will eventually shift from 6MHz-wide channels in favor of super-wide 200MHz channels

Jeff Baumgartner, Senior Editor

October 16, 2012

3 Min Read
Light Reading logo in a gray background | Light Reading

ORLANDO -- Cable-Tec Expo -- Cable's pursuit of a speedier data platform called Docsis 3.1 could eventually see the industry migrate away from 6MHz channel spacing and toward a platform that relies on more efficient, super-wide 200MHz channels.

Much more about Docsis 3.1 will be shared here on Thursday, but the new channel environment and anticipated PHY-layer change was one of the key items engineers from Broadcom Corp. (Nasdaq: BRCM) and Motorola Mobility discussed on Tuesday during a technical session about the CableLabs initiative. (See Docsis 3.1 to Be Smarter, Faster & Cheaper and Docsis 3.1 to Be Revealed at Cable-Tec Expo.)

North American Docsis currently uses 6MHz-wide channels that each pump out about 40Mbit/s, while EuroDocsis using 8MHz channels that yield about 50Mbit/s. With Docsis 3.1, the cable industry hopes to squeeze out more bits per hertz by chopping 200MHz-wide blocks into thousands of small subcarriers and combining them using the orthogonal frequency-division multiplexing (OFDM) modulation scheme. It's believed that this approach can help to improve spectral frequency by at least 25 percent.

Utilizing one of those blocks would enable cable to produce a data path in the neighborhood of 1Gbit/s. Cable later bond together 200MHz-wide channels together to create multi-gigabit capacities and give cable the ability to keep up with fiber-to-the-premises (FTTP) speeds without having to pull fiber all the way to the home.

Motorola Mobility, a vendor that's participating in the development of the specs, is recommending a Docsis 3.1 capacity target of 10Gbit/s downstream and 2.5 in the upstream, said Robert Howald, fellow of the technical staff at the company.

Starting small
But Niki Pantelias, associate technical director for Broadcom's broadband technology group, suggested that it would be unwise to design a Docsis 3.1 modem that can bond multiple 200MHz-wide channels and approach speeds of 5Gbit/s or more right out of the chute.

That's partly because Broadcom believes the cost of such a modem would be prohibitive, at least in the early going. Plus, it's unlikely that cable will even need to deliver capacities of more than 1Gbit/s to residential customers in the near-term. She instead sees Docsis 3.1 modems starting off with single-channel designs and later evolving to bond together multiple channels as chip processing performance and pricing improve, and customers actually need those bigger capacities.

Because Docsis 3.0 and 3.1 will use different modulation schemes, it's anticipated that cable will have to carve out separate spectrum for each platform for awhile, producing a temporary coexistence model.

But to maintain backward-compatibility at the modem layer, Dr. Richard Prodan, the CTO of Broadcom's broadband technology group, suggests that the first generation of Docsis 3.1 devices use a special piece of hybrid silicon that support both Docsis 3.0 and 3.1 receivers. Cable could then later cut over to 3.1-only modems as operators phase out 6MHz channels in favor of the new broadband platform. But that transition is expected to take several years.

— Jeff Baumgartner, Site Editor, Light Reading Cable



About the Author

Jeff Baumgartner

Senior Editor, Light Reading

Jeff Baumgartner is a Senior Editor for Light Reading and is responsible for the day-to-day news coverage and analysis of the cable and video sectors. Follow him on X and LinkedIn.

Baumgartner also served as Site Editor for Light Reading Cable from 2007-2013. In between his two stints at Light Reading, he led tech coverage for Multichannel News and was a regular contributor to Broadcasting + Cable. Baumgartner was named to the 2018 class of the Cable TV Pioneers.

Subscribe and receive the latest news from the industry.
Join 62,000+ members. Yes it's completely free.

You May Also Like