Brocade Boasts Bigger 10GE

Showing off to industry analysts this week, the company trots out some Ethernet advances for the data center and the service-provider core

Craig Matsumoto, Editor-in-Chief, Light Reading

September 12, 2012

3 Min Read
Brocade Boasts Bigger 10GE

Brocade Communications Systems Inc. (Nasdaq: BRCD) is announcing a couple of switching advancements Wednesday and while neither is all that radical, both show the vendor upping its game in key competitive areas.

Both products are likely to be highlights of Brocade's analyst day, being held Wednesday at its San Jose, Calif. headquarters.

Bigger fabric
For data-center fabrics, Brocade is introducing the VDX 8770 Switch, a larger, modular version of the VDXs already shipping. (Brocade has been referring to the new box as Project Mercury.)

Each blade can support 48 ports of 10Gbit/s Ethernet, for a total of 384 in the eight-slot configuration. Brocade says the box has switch-fabric capacity for all that traffic; in fact, the box is built with 100Gbit/s ports in mind, but those interfaces are in Brocade's plans for late 2013, says Premal Savla, a Brocade senior product manager.

Brocade's VDX, which the company claims has more than 700 customers, is competing with other data-center fabric options, among them, FabricPath from Cisco Systems Inc. (Nasdaq: CSCO) and the QFabric from Juniper Networks Inc. (NYSE: JNPR). ("Fabric" in this case refers to the data center's arrangement of switches, not the chip inside the switches.)

Brocade calls its fabric Brocade One, and like FabricPath, it's based on the Trill protocol. Avaya Inc. pitches a fabric based on another protocol called Shortest Path Bridging. And while Juniper hasn't detailed the innards of QFabric, there's recent speculation that it runs on a variation of Multiprotocol Label Switching (MPLS) .

For more

  • Juniper's QFabric Looks Ordinary Inside

  • Brocade Responds to Juniper's QFabric

  • Brocade Develops a Cloud Complex

Down in the core
On the carrier side, Brocade is also announcing a move toward the dense Layer 2 "supercore" that some service providers are talking about.

The idea there is to place a massive Layer 2 switch in the core, often using MPLS label-switched paths (LSPs) in place of core-router connections, primarily to save money. Juniper's PTX addresses this market and Cisco is offering MPLS blades to let its CRS-3 core router handle this function as well.

To that end, Brocade on Wednesday is announcing a 24-port 10Gbit/Ethernet blade for its MLXe routers -- meaning its approach to the supercore resembles Cisco's more than Juniper's. It's a density leap for Brocade, which has only offered up to eight 10Gbit/s Ethernet ports per card for the MLXe. (A two-port 100Gbit/s card is available, too).

Brocade says the new card enables a maximum 768 10Gbit/s Ethernet ports per MLXe chassis. Juniper puts up similar numbers, as it offers a 24x10Gbit/s Ethernet card for the PTX and can likewise support 768 10Gbit/s ports on the larger version of that product, the PTX9000.

Cisco's MPLS blade for the CRS-3 supports 140Gbit/s, according to the company's data sheets.

For more

  • Cisco's Core Router Goes Packet-Optical

  • Juniper Makes Its Packet-Optical Move

  • OFC/NFOEC 2011: Juniper OEMs an ADVA Box

— Craig Matsumoto, Managing Editor, Light Reading

About the Author(s)

Craig Matsumoto

Editor-in-Chief, Light Reading

Yes, THAT Craig Matsumoto – who used to be at Light Reading from 2002 until 2013 and then went away and did other stuff and now HE'S BACK! As Editor-in-Chief. Go Craig!!

Subscribe and receive the latest news from the industry.
Join 62,000+ members. Yes it's completely free.

You May Also Like