Fiber Bragg Gratings on Speed

Southampton Photonics says it's eliminated delays in making customized DWDM components

February 12, 2001

3 Min Read
Fiber Bragg Gratings on Speed

New developments in fiber Bragg gratings (FBGs) -- devices used to split and recombine light in dense wavelength-division multiplexing (DWDM) systems -- were announced today by Southampton Photonics Inc. (see 'First FBGs with 25 GHz Spacing').

On the face of it, the big news is that Southampton Photonics has shipped the first commercial FBGs with 25-GHz channel separation. This promises to enable vendors' DWDM gear to handle 160 wavelengths per channel, enabling many of them to honor promises to their customers.

However, the real significance of the announcement might not be in the FBGs themselves but in the way in which they were made. Southampton Photonics has automated the process of setting up the production equipment to make its FBGs to particular customer requirements, shrinking the time required to do this from an average of six to eight weeks to a mere 24 hours.

The company has also automated the manufacturing process, enabling each production line to churn out as many as 5,000 FBGs a month. That’s an average of an FBG every nine minutes, assuming 100 percent yields -- a figure that’s “impressive” (if a little hard to believe), according to Tom Mock, director of product management at Ciena Corp. (Nasdaq: CIEN). Ciena makes FBGs for use in its own equipment and has already announced 25-GHz and 12.5-GHz channel spacing (see Ciena Expands CoreStream Offerings).

Southampton Photonics already has two production lines and plans to build a third one -- facilitating production of 15,000 FBGs a month. This prompts more raised eyebrows. “That’s a very big number,” says Mock. Victor Mizrahi, Ciena’s former chief scientist, doubts whether there’s demand for that quantity of FBGs.

Ciena and Southampton Photonics appear to make FBGs in similar ways and reap similar benefits. Both outfits avoid the need to design and make special phase masks for placing over lengths of doped fiber before blasting it with ultraviolet light to create gratings (barcode-like patterns of stripes) -- the way most other vendors make FBGs. Instead, both Ciena and Southampton Photonics have developed computer programs that are able to make gratings from a set of standard phase masks.

Eliminating the purpose-designed phase mask avoids lengthy manufacturing delays. It also enables engineers to make longer, more complex gratings that can isolate wavelengths more cleanly than is possible with other processes. This equates to being able to reduce the spacing between wavelengths.

As the fiber can be of any length, Southampton says there’s no real limit to channel spacing. “We can do 12.5 [GHz], we can do six, we can do one,” says David Payne, Southampton Photonics’ chairman and the director of Southampton University’s Optical Research Center. Cramming even more wavelengths into a fiber isn't a technical challenge: "It's a cost equation," he notes.

Being able to create different FBGs by simply tinkering with a computer program also means that Southampton Photonics can shift production from one grating design to another at the drop of a hat. That’s handy, of course, because vendors need a different FBG for each wavelength. In other words, a 160-channel DWDM system will need 160 different FBGs.

All of this automation leads to lower costs, but Southampton Photonics isn’t keen on talking about how that might effect its prices. A spokesman says that high-performance FBGs like theirs sell for $1,000 apiece. At that rate, the startup could make a cool $15 million a month from its three production lines, if they worked flat out.

Mizrahi is dubious. “People aren’t willing to pay $1,000 for an FBG,” he says. If they would, he’d get into the business of making them himself, he says.

-- Peter Heywood, international editor, Light Reading

Subscribe and receive the latest news from the industry.
Join 62,000+ members. Yes it's completely free.

You May Also Like