x
Optical/IP

MPLS Vendors Demo Fast Reroute

Yesterday, Isocore, an independent testing facility in McLean, Va , hosted its third public interoperability demonstration where it tested for the first time a new Internet Engineering Task Force (IETF) draft of MPLS Fast Reroute, a technology that brings Sonet-like protection to Multiprotocol Label Switching (MPLS) networks (see MPLS Fast Reroute Gains Momentum).

Cisco Systems Inc. (Nasdaq: CSCO), Avici Systems Inc. (Nasdaq: AVCI; Frankfurt: BVC7) and Juniper Networks Inc. (Nasdaq: JNPR) participated in the test using specifications from a draft written by George Swallow of Cisco, which combine work from two other drafts on Fast Reroute. The test focuses on link protection and did not include node protection mechanisms. Cisco and Avici had tested an earlier Fast Reroute draft for link protection in August.

Ixia (Nasdaq: XXIA), Spirent plc (NYSE: SPM; London: SPT), and NetTest provided the testing equipment.

The importance of the demo is twofold. For one, this is the first time that all three core routing vendors have tested this feature together. And second, it is an important step forward in developing this critical feature for MPLS.

“The idea behind doing these demos is to show certain technologies working today,” says Bijan Jabbari, president of Isocore. “But we need to work further to make sure all the features are standardized. And I think that this process will help facilitate that.” The test bed included IP core routers from three vendors: Avici’s TSR, two Cisco GSR 12404s, and Juniper’s M10. The way it was set up was that traffic entered the network at the CoSine Communications Inc. (Nasdaq: COSN) IPSX3500, which was used as the access router. It routed traffic to the Cisco GSR. The Cisco GSR then routed it to the Juniper M10, which routed it onto another Cisco GSR. When the cable was disconnected between the Cisco GSR and the Juniper M10 router, the Fast Reroute mechanism kicked in and rerouted the traffic to the Avici TSR, which was connected to the GSR and M10. Is that clear? The network restoration occurred in roughly 5 milliseconds, well within the current Sonet standard that requires 50 milliseconds restoration. Restoration in the demo has consistently run within 10 milliseconds, says Jabbari.

The reason the restoration is so quick is because the traffic is rerouted locally. There is no signaling protocol that propagates through the network to let the next hop know packets are coming, making the failover time to an alternate path extremely fast, says Don Troshynski, senior systems engineer for Avici.

The demonstration itself was not terribly exciting to watch. In fact, most of the observers didn’t even realize the test was going on until it was over. Even Tony De La Rosa, product manager for Ixia, who was running the demonstration and explaining what was happening, hadn’t realized that the line between the routers had been disconnected. Interestingly enough, this seems to be the point of demonstrations showing off reconvergence technologies. The point is to show restoration occurring so quickly that there is no noticeable loss of service.

“Restoration time can fluctuate within a certain range,” says Amrit Hanspal, product manager for MPLS and QOS at Cisco. “As long as you keep it below 50 milliseconds, it’s alright. And even then some applications will be fine if the restoration time is longer. Call signaling is usually dropped after 1 or 2 seconds.”

The vendors involved in setting up the network and the test have been working together on this project for the past few months, dedicating two full days to setting up the demonstration prior to its public debut. The work that was done to get this implemented will go a long way in helping these vendors further define the standard, says Loa Andersson, chief architect for Utfors AB.

“From an IETF perspective this is a pretty good basis for developing the protocol design,” he says. “It’s still early days for this feature, and this a good way to work out the problems early on.”

Andersson says that from a service provider perspective, this demonstration could highlight problems that he would look for when implementing the feature in his company’s own test bed.

Heidi Tse, a backbone engineer for WorldCom Inc. (OTC: WCOEQ), says that these demonstrations are important to a degree, but she emphasizes that carriers must still test the gear themselves.

“We don’t want to be a vendor’s guinea pig,” she says. “But you also have to understand that this is not a sophisticated test, and we would have to test it much more in depth ourselves if we were going to implement this feature. Still, tests like this are important because it will help move the standard along and we all need the standard before we do anything.”

Isocore also demonstrated yesterday interoperability for label switched path (LSP) protection using gear from Marconi plc (Nasdaq/London: MONI). And it demonstrated provisioning of Layer 3 MPLS/BGP (Border Gateway Protocol) and Layer 2 Draft Martini virtual private networks using gear from Cisco, CoSine Communications Inc. (Nasdaq: COSN), Foundry Networks Inc. (Nasdaq: FDRY), Extreme Networks Inc. (Nasdaq: EXTR), Lucent Technologies Inc. (NYSE: LU), and Redback Networks Inc. (Nasdaq: RBAK).

Jabbari says Isocore plans to conduct more interoperability tests next year. Specifically, he would like to test node detour in MPLS fast reroute in addition to the link protection that was demonstrated already. But he says he must wait for all the vendors to have a working implementation of that spec before a test can be designed. Andersson and Tse will likely be tuning in again to that one.

“Node protection is on my Christmas wish list,” says Andersson. “But we need to take one thing at a time. I’m glad they’ve got the link protection working. Now they can move on to the node protection.”

— Marguerite Reardon, Senior Editor, Light Reading
www.lightreading.com
Page 1 / 16   >   >>
sgan201 12/4/2012 | 9:23:08 PM
re: MPLS Vendors Demo Fast Reroute Hi All,
The latest issue of Business Communications Review.. Equant is quoted as having more than 500 customers for IP VPN services.. You can draw your own conclusion from that statement..
By the way, Equant is one of the largest IP VPN provider...
fiber_r_us 12/4/2012 | 9:24:00 PM
re: MPLS Vendors Demo Fast Reroute SNA is supported, just like any other protocol. FR is agnostic to the protocols above it. If you wished to give SNA priority, you would simply use one of the higher service classes.
sgan201 12/4/2012 | 9:24:05 PM
re: MPLS Vendors Demo Fast Reroute Hi Fiber_r_us,
Is SNA supported or not supported on this FR over MPLS network??
sgan201 12/4/2012 | 9:24:05 PM
re: MPLS Vendors Demo Fast Reroute Hi,
It would be very interesting to find out what is the maximum trunk utilization level that the MPLS network is traffic engineered to. It would seem like it has to 40% or even 20% to achieve that kind of SLA...
sgan201 12/4/2012 | 9:24:06 PM
re: MPLS Vendors Demo Fast Reroute Worldcom FR according to Current Analysis
Frame Delivery CIR PVCs 99.99%
PVC Delay 60 ms one-way
Port Availability 100%
Data Delivery Ratio 99.99% within CIR
Network Availability 100%
Mean Time to Repair 2 hours On-Net



Back to Top

sgan201 12/4/2012 | 9:24:06 PM
re: MPLS Vendors Demo Fast Reroute Sprint FR according to Current Analysis
Frame Delivery CIR PVCs 99.90%
PVC Delay 55-130 ms
Port Availability 100% for BMAN
Data Delivery Ratio 99% w/no CIR, 99.9% w/CIR spec.
Network Availability 100% for BMAN
Mean Time to Repair ICB


sgan201 12/4/2012 | 9:24:06 PM
re: MPLS Vendors Demo Fast Reroute AT&T FR according to current Analysis
Frame Delivery CIR PVCs 99.90%
PVC Delay 60 ms one way
Port Availability 99.99%
Data Delivery Ratio 99.99% at CIR
Network Availability 99.99%
Mean Time to Repair 4hrs-8hrs if dispatch is needed



Back to Top

gardner 12/4/2012 | 9:24:09 PM
re: MPLS Vendors Demo Fast Reroute Actually if you zoom it all the way (I have 5.0 Acrobat reader) it is very readable.

It says:

*First availability figure is for single-attached access. The second is for dual-attached.
** All latency guarantees are route-specific. The range provided represents the minimum and maximum values.
***For optimized traffic, committed traffic carries a 100% delivery SLA. Burst traffic carries a 99.95% delivery SLA.

And there you have it sports fans.
sgan201 12/4/2012 | 9:24:09 PM
re: MPLS Vendors Demo Fast Reroute http://www.nwfusion.com/news/2...

Check out Worldcom Economy FR and Bundled FR pricing..
fiber_r_us 12/4/2012 | 9:24:10 PM
re: MPLS Vendors Demo Fast Reroute Zoom in on it and its readable (barely)...
Page 1 / 16   >   >>
HOME
Sign In
SEARCH
CLOSE
MORE
CLOSE