FOXBORO, Mass. -- Telco Systems, a BATM Company (LSE: BVC) has announced the expansion of their Fiber-to-the-Home (FTTH) offerings with the introduction of the EdgeGate 242W, an indoor wireless-enabled active Ethernet residential gateway, and an enhanced EdgeGate 483 outdoor CPE gateway with dual 1Gigabit uplinks.

The EdgeGate 242W offers service providers the ability to deliver full triple play services while solving the home owners’ problem of in-home wiring by using wireless home networking. As a single box solution, the EdgeGate 242W also offers enhanced TV options with support for both IPTV and RF video, advanced routing capabilities and enhanced telephony features like three-way calling, call forward and hold, distinctive ring, and T.38 support for fax over IP.

A built-in bridge and router enable customers to connect their home network either through one of four 10/100Base-T LAN ports or the wireless 802.11b/g access point. Analog phone sets can be connected to one of two FXS POTS ports to provide VoIP using SIP signaling protocol. The EdgeGate 242W supports up to 100Mbps downstream and 100Mbps upstream over bi-directional fixed fiber ports.

Designed for indoor installations, the product’s fiber optics cable management module can be installed prior to activation of the service, and the active components can be connected when the service is signed. Service activation is completed easily by the end user with no need to send a technician to the customer’s house.

The EdgeGate 483D is an enhancement to the existing outdoor EdgeGate 483 family which adds dual 1Gigabit fiber uplinks to support ring and chain topologies of multiple units. The EdgeGate 483D offers eight Ethernet ports to support both data and video services for computers and TVs, and two analog voice ports which can connect to two separate telephone lines which are converted to VoIP. This EdgeGate has an unique design that future-proofs the user’s access connection by supporting either 100Mbps or 1Gbps dual uplinks in the same product, thus allowing the service provider to start deployment with 100M network and upgrade to 1Gigabit without replacing the CPE. The outdoor design provides separate technician access areas from subscriber access areas as well as enhanced cable management.

Telco Systems (BATM)