x

Nortel: Another Fine Mesh

Nortel Networks Ltd. (NYSE/Toronto: NT) says it expects to see the first commercial deployments of its 802.11-based mesh networking technology by the end of this year.

The firm has been testing the technology -- intended to reduce the cost of providing wired backhaul to WiFi networks by (surprise!) removing more of the wiring -- with BT Group plc (NYSE: BTY; London: BTA) and Massachusetts Institute of Technology (MIT) since October 2003.

Nortel is now getting ready to start phase two of its MIT pilot. The company soon hopes to add a wireless ISP and a university in the U.S. to that that list -- as well as a number of other tests in Europe, Latin America, and the Caribbean, Todd Etchieson, director of wireless mesh network business management for Nortel tells Unstrung "There's a lot of anticipation in the market," Etchieson says. "I think we'll be seeing commercial deployments in the back end of this year."

Nortel's mesh technology uses a dual wireless LAN setup to work its magic. Network users can currently connect via 802.11b (11 Mbit/s over 2.4GHz), although Etchieson says that Nortel will soon offer an upgrade to the faster 802.11g standard (54 Mbit/s over 2.4GHz) on the user channel.

Backhaul to a wired Internet connection like a T1 line is handled over a separate 802.11a channel (54 Mbit/s over 5GHz). The a channel is used because it offers more bandwidth and less potential radio intereference than b.

Of course, there's a little more to mesh networking than just a straight line between an access point and the Internet [ed. note: otherwise it wouldn't be much of a mesh then, would it?]. Unlike conventional wireless LAN access points, which are individually connected to a wired network, mesh systems exploit the multiple radio links available in an 802.11 system to extend the wireless range of the network, passing data back and forth over WiFi links to one or two wired connections at the end of the line.

Nortel is also using multiple antennas (a.k.a. "smart" antennas) in its mesh access points to increase range and capacity, although the company doesn't like to give detailed figures about the performance of its APs yet.

In general, the broad acceptance of 802.11 wireless LAN in public and private implementations has helped to spark more interest in mesh networking applications for wireless technology.

Nortel's rivals in this space include many startups like BelAir Networks, and Firetide Inc., Strix Systems Inc.. But it seems that Nortel may be the first of the major networking players to commercially deploy the technology.

— Dan Jones, Site Editor, Unstrung

standardsarefun 12/5/2012 | 1:31:08 AM
re: Nortel: Another Fine Mesh no not really. the big issue is short links always beats long links and that when you engineer a network you normally make the links as long as possible according to the constraints you observe which means NEW short links that pop up (or drive past) will kill these long links
lefko 12/5/2012 | 1:31:21 AM
re: Nortel: Another Fine Mesh If I understand the stated problem correctly, Collision Avoidance built into 802.11 does not interfere. A better term would be coexist. It steals bandwith, not clobbers packets, or cripples data transmission. In a mesh network, since all nodes are on the same frequency they "interfere" with each other in the same way.
jradisch 12/5/2012 | 1:37:19 AM
re: Nortel: Another Fine Mesh Agreed. Esp if the 802.11a backhaul in adhoc mode
hits say Proxim Tsunami in UNII beam or even one of those OrthagonalModulation jobs from WiLan. Most of these thingz are point2point for sure but yah, its a matter of the interference mitigation process where the MESH Integrator would then have to go knocking on doors to ask to share the band etc etc. Can you Engineer a totally interference free MESH-nope, not in our lifetime but I betcha each ISM band user could mitigate the effects of band crowding for sure. I just started training on Firetide-« product and same issues are being addressed, with some areas _left_blank_. Also, why is Nortel late to every dance? Do they have 7250/72xx ready now, or is still in trial, and they are just being quite careful? Or is this MESH idea of backhaul just so so new and fresh that the stuff really needs the shakeout? Interesting to wait and watch- I'll check back on this forum later.
John R. in Canada
standardsarefun 12/5/2012 | 1:37:29 AM
re: Nortel: Another Fine Mesh Mixing 802.11a meshed backhaul with 802.11b access is a nice trick but how can you hope to deploy such a network on a commercial basis in an urban area using the normal WLAN unlicenced bands?

Imagine, some poor operations team setting up a backhaul network using say 200m spans, they test it and everything works. They announce coverage to the commercial guys and the first paying (remember this gear is to be used by players like ATT and BT!) users come on line.

10 days later someone switches on a nice big corporate WLAN in between two of the backhaul APs and bang - the entire zone (not just one AP!) goes off line.

Yes a mesh might offer alternative paths but that just means that either a) the backhaul capacity drops by 50% with the first corporate WLAN in the zone or b) everything is fine for the first one but you loose the lot when the second system comes online near the alternative route.

Compare this to a DSL or licenced spectrum WiMAX backhaul with 802.11a/b/g access - the big corporate WLAN nearby will only kill (part of?) one AP's coverage not the entire city.

Boring network engineering problem I know but I'd hate to see he business plan with all the "re-visit, re-engineer" OPEX costs...
HOME
Sign In
SEARCH
CLOSE
MORE
CLOSE