Qualcomm says new RF modules will help solve the 'proximity effect' problem for 5G mmWave smartphones.

Dan Jones, Mobile Editor

July 23, 2018

2 Min Read
Qualcomm Unveils New Modules to Power Millimeter Wave 5G for Smartphones

Qualcomm says its new millimeter wave RF antenna will fulfill the gigabit-speed promises of 5G for smartphones, as early as the first half of 2019.

On Monday morning, Qualcomm Inc. (Nasdaq: QCOM) unveiled QTM052, an integrated -- and tiny -- millimeter (mmWave) RF module to be used with 5G phones and other mobile devices, as well as a sub-6GHz QPM56xx module. Both support the 3rd Generation Partnership Project (3GPP) 5G New Radio (5G NR). The modules are designed to be used in conjunction with Qualcomm's X50 5G modem. (See Oh Snap! Qualcomm Unveils X50, Its First 5G Modem.)

Qualcomm's director of 5G marketing, Sherif Hanna, says that the idea is to use mmWave modules with the Qualcomm modem and install three or four around the edge of the phone. "We have these up and running in the lab," he says.

Figure 1: Qualcomm QTM052 mmWave module

As Light Reading has reported, mmWave makes life difficult for cellphone designers. This is because of the "proximity effect," where human hands or bodies can completely block the high-band signal when holding the phone. The 28GHz mmWave spectrum that will support 5G, particularly in the US, is much higher than has been used in cellular service before, and does not propagate well. (See 5G Will Change How Your Smartphone Is Designed.)

With the X50 modem and new modules, a smartphone will be able to switch mmWave beams between the antennas on the phone, if one of the beams is blocked by a hand (or something else), says Hanna. Interestingly, he did show how the modules would fit in the bevels around the edge of the Qualcomm 5G test platform smartphone. But he did not want Light Reading to photograph the phone, which looked smaller than an earlier prototype Qualcomm showed off. (See Qualcomm: The First 5G Smartphone on Display?.

After talking to vendors, Light Reading expects the majority of global 5G rollouts to happen in sub-6GHz frequencies. In the US and South Korea, however, we can expect 28GHz -- and possibly 39GHz -- mmWave deployments, as well as sub-6GHz deployments.

Hanna believes the RF modules will give Qualcomm a jump on the competition for high-band 5G. "We're pretty confident we're going to be the only millimeter wave 5G solution, at least for smartphones," he said.

Hanna expects to see 5G mobile hotspots, using Qualcomm silicon, out before the end of the year. 5G smartphones should be out during the first half of 2019. (See Qualcomm: First 5G Smartphones Coming Mid-2019.)

— Dan Jones, Mobile Editor, Light Reading

About the Author(s)

Dan Jones

Mobile Editor

Dan is to hats what Will.I.Am is to ridiculous eyewear. Fedora, trilby, tam-o-shanter -- all have graced the Jones pate during his career as the go-to purveyor of mobile essentials.

But hey, Dan is so much more than 4G maps and state-of-the-art headgear. Before joining the Light Reading team in 2002 he was an award-winning cult hit on Broadway (with four 'Toni' awards, two 'Emma' gongs and a 'Brian' to his name) with his one-man show, "Dan Sings the Show Tunes."

His perfectly crafted blogs, falling under the "Jonestown" banner, have been compared to the works of Chekhov. But only by Dan.

He lives in Brooklyn with cats.

Subscribe and receive the latest news from the industry.
Join 62,000+ members. Yes it's completely free.

You May Also Like